17
Jan
Author: admin // Category:
Tips
Snow plow Abs Brake system-How does it work?
ABS) means antilock brake system , which is a safe and effective braking system. (ABS ) gives the driver the ability to maintain directional stability, control over steering, and in some situations, to help reduce stopping distances during emergency braking situation, particularly on wet and slippery or icy road surface. To gain this safety advantage, drivers NEED TO learn how to operate their ABS correctly. You want to make sure to read the owners manual of the vehicle you drive that is equipped with the ABS system. . ABS simply keeps your base brakes from locking up. In vehicles not equipped with ABS, the driver can manually pump the brakes to prevent wheel lockup
What does the ABS do to my brakes
What ABS does is very similar to a person pumping the brakes. It automatically changes the brake pressure in your truck’s brake lines to maintain maximum brake performance just before locking up the wheels. ABS does this very rapidly with electronics impulses in your brake system.
Why should I think it is important ?
As you know when your brakes lock up on wet and icy or slippery roads or at other times ,during a panic stop, you lose steering control and your vehicle can spin. Rear wheel ABS prevents wheel lockup so that your car stays in a straight line. If your car has ABS control on all four wheels, you also keep steering control. If you have steering control, it is possible to avoid a crash by steering around hazards if a complete stop cannot be accomplished in time So that’s why you should consider this a very important brake feature. When driving you may experience a rapid pulsation of the brake pedal–almost as if the brakes are pushing back at you. Sometimes the pedal could suddenly drop. Also, the valves in the ABS controller may make a noise that sounds like grinding or buzzing. In some cars you may feel a slight vibration–this means the ABS is working. It is important NOT to take your foot off the brake pedal when you hear noise or feel pulsations, but instead continue to apply firm pressure. Not all Abs systems are the same so make sure you read the ABS section in your vehicles owners manual.
Related Posts:
07
Dec
Author: admin // Category:
Tips
As all savvy marketing types know, people frequently buy with their eyes. That’s why it is important to keep the exterior of your restaurant as pristine and inviting as possible.
Pressure washing your parking lot and sidewalks to clean oil spills, grease, excess dirt, chewing gum and other debris is a great way to make that first impression a good one.
Set your washer for 2600 and go at it. Be sure not to neglect your outdoor seating area, if you have one. For extra greasy areas, be sure to presoak the area. You may need to up the pressure to blow away chewing gum.
And don’t forget to clean your dumpster pad area regularly. Spills and caked food on and around the dumpster can attract the kind of varmints and vermin that could drive potential business into your cleaner competitors.
Related Posts:
07
Dec
Author: admin // Category:
Tips
Adding a sandblasting attachment to a pressure washer can be very effective. However, how well wet sandblasting works also depends on the application that you are using it for. For instance, if you have a pressure washer capable of pumping out 4 GPM at 3,000 PSI, your unit will use 250 pounds of abrasive if used continuously for an hour. It has about half the effectiveness of a commercial sandblaster. However, sandblasting with a pressure washer is ideal in small building jobs where you already have a unit available. Environmental jobs may require you to wet sandblast. Building restoration projects in historical structures may also use wet sandblasting in lieu of chemical cleaning.
Related Posts:
07
Dec
Author: admin // Category:
Tips
After following the steps for preparation of the job adjust the water pressure of your electric pressure washer or gas pressure washer between 1500 to 1800 psi. This should be sufficient to power wash a deck.
* You should work in pendular strokes, as if you were doing low swing with a golf club.
* Keep the jet in motion at all times to avoid marking the surface where you start and stop. If a stain does not come off on the first try, keep passing over it until it dissolves.
* Don’t let the cleaning solution sit for more than 10 to 15 minutes or it will dry and leave residue.
* Rinse with plenty of fresh water from your cold water powerwasher.
* Let your deck dry for 24 hours before applying the sealant.
Related Posts:
